Load Cells
Center-hole Type Compression Load Cell
KCE-NA Center-hole type Compression Load Cell 500kN to 2MN
The KCE-NA Load Cell is a center-hole-type load cell designed to use in tension measurement of anchoring strand. It can deliver stable measurement performance under somewhat eccentric load. An extra model with built-in temperature sensor is available.
Protection ratings : IP 67 equivalent
Features
- Splash-proof structure
- Small effect of eccentric load
| Type | Capacity | Rated output | Non-linearity | Temperature range |
|---|---|---|---|---|
| KCE-500KNA | 500 kN | 1.25 mV/V
(2500×10-6 strain) ±10 % |
0.5 %RO | -20 to +70 ℃ |
| KCE-1MNA | 1 MN | |||
| KCE-1.5MNA | 1.5 MN | |||
| KCE-2MNA | 2 MN |
Output polarity
Measurement moves in the minus direction with regard to increased compressing force.
KCH-NA Center-hole type Compression Load Cell 500kN to 2MN
The KCH-NA Load Cell is a center-hole-type load cell designed to use in tension measurement of anchoring strand. It can deliver stable measurement performance under somewhat eccentric load.
Protection ratings : IP 68 equivalent
Features
- Protection ratings IP 68 equivalent
- Small effect of eccentric load
| Type | Capacity | Rated output | Non-linearity | Temperature range |
|---|---|---|---|---|
| KCH-500KNA | 500kN | 1.25mV/V
| 0.2 %RO | -20 to +70 ℃ |
| KCH-1MNA | 1MN | |||
| KCH-1.5MNA | 1.5MN | |||
| KCH-2MNA | 2MN |
Output polarity
Measurement moves in the minus direction with regard to increased compressing force.
KCK-NA Center-hole type Compression Load Cell 500kN to 1MN
The KCK-NA load cell is a center-hole type load cell designed to use in tension measurement of anchoring strand. It is suited to lift-off testing and monitoring of existing anchors.
This system was developed as a joint research project, “development of a new-type anchor load cell allowing easy installation to /replacement of an already installed anchor” (Nov. 2006 to Sep. 2009), by the Public Works Research Institute and 8 private companies.
Protection ratings : IP 67 equivalent
Features
- Aki-Mos (installed anchor tensile force monitoring system) load cell
- Light weight
- Low Profile
| Type | Capacity | Rated output | Non-linearity | Temperature range |
|---|---|---|---|---|
| KCK-500KNA | 500 kN | 1.25m V/V
(2500×10-6 strain)±10 % |
1% RO | -30 to +70 °C |
| KCK-1MNA | 1 MN | 1.25m V/V
(2500×10-6 strain)±10 % |
Output polarity
Measurement moves in the minus direction with regard to increased compressing force.
KCM-NA Center-hole type Compression Load Cell 10kN to 5MN
The KCM-NA Load Cell is a center-hole-type load cell with strain gauges mounted on a cylindrical strain sensing element. It is used to measure prestress or tension force on ground anchors, pullout testing and measuring axial force on tie rods. The model is especially well suited for measuring on site.
Protection ratings : IP 67 equivalent
Features
- Splash-proof structure
- Small, Easy handling
| Type | Capacity | Rated output | Non-linearity | Temperature range |
|---|---|---|---|---|
| KCM-10KNA | 10 kN | 1.5 mV/V
| 0.5 %RO | -20 to +70 ℃ |
| KCM-20KNA | 20 kN | |||
| KCM-50KNA | 50 kN | 1.5 mV/V (3000×10-6 strain) ±10 % | ||
| KCM-100KNA | 100kN | |||
| KCM-200KNA | 200kN | |||
| KCM-300KNA | 300 kN | |||
| KCM-500KNA | 500 kN | |||
| KCM-1MNA | 1 MN | |||
| KCM-2MNA | 2 MN | 1％ RO | ||
| KCM-3MNA | 3 MN | |||
| KCM-5MNA | 5 MN |
Output polarity
Measurement moves in the minus direction with regard to increased compressing force.