Load Cells
Low Capacity 3-Component Load Cell SLP-NA-T
The SLP-NA-T is a strain gauge based load cell for simultaneous measurement of forces in three mutually perpendicular axes. Since the load cell is constructed small and light, it is well suited to use in model testing.
Protection ratings : IP 65 equivalent
Features
- Small and light
- Good response
- Easy handling
- Applicable to wind tunnel testing and vibration testing of models
Specifications
TYPE | SLP-100NA-T | SLP-200NA-T | SLP-500NA-T | SLP-1KNA-T |
---|---|---|---|---|
Capacity Fx, Fy, Fz | 100N | 200N | 500N | 1kN |
Rated Output | Approx. 0.5mV/V (1000×10-6 strain) | |||
Non-linearity | 0.5%RO | |||
Hysteresis | 0.5%RO | |||
Cross sensitivity | 2%RO | |||
Temperature effect on zero | 0.05%RO/°C | |||
Temperature effect on span | 0.05%/°C | |||
Compensated temperature range | -10 ~ +60°C (No icing) | |||
Allowable temperature range | -20 ~ +70°C (No icing) | |||
Overload | 150% | |||
Ultimate overload rating | 200% | |||
Input/Output resistance | 350Ω | |||
Recommended exciting voltage | 2V or less | |||
Allowable exciting voltage | 15V | |||
Zero balance | 20%RO | |||
Weight | Approx. 300g | Approx. 800g |