Static Strainmeters
Channel Unit
This is a 10-channel unit designed for exclusive use with portable data logger TDS-150. Five numbers of this unit (50 channels) at the maximum can be connected to one TDS-150. Measurement of strain, DC voltage, thermocouple and Pt-RTD are possible. It also accepts measurement of 1-gauge 4-wire method using modular plug for connection.
Features:
- 1-gauge 4-wire method with one-touch connection by modular plug
Specifications
| Type | FSW-10 |
|---|---|
| Measuring object | Strain, DC voltage, Thermocouple, PtRTD |
| Number of measuring channels | 10 channels |
| Power supply | Supplied from data logger |
This is a 10-channel unit allowing multiple measurements designed for exclusive use with portable data logger TDS-150. Up to five units (50 channels) can be connected. Allows measurement by strain gauge, strain gauge-type transducer, DC voltage, thermocouple, and Pt-RTD.
Features:
- Installs compactly without an NDIS connector, etc.
Specifications
| Type | FSW-10L |
|---|---|
| Measuring object | Strain, DC voltage, Thermocouple, PtRTD |
| Number of measuring channels | 10 channels |
| Power supply | Supplied from data logger |
To add measuring channels to the TS-360 portable data logger, connect the AU-10/AU-10-05 channel unit!
Unit to add 10 measuring points. Set the unit number using the digital switch and assign a channel number to each measuring point of the unit. The channel unit is connected to the driver unit AU-50MA or the master unit AU-50M.
During measurement, the LED corresponding to the measurement channel lights up and the LED emission color varies depending on the sensor mode type (LED emission color Strain measurement: red, DC voltage measurement: blue, thermocouple temperature measurement: green).
Features:
- Up to 5 additional units can be added against the T-ZACCS+ master unit
- When used as a switching box, it can be used with conventional data loggers such as TDS-540 and can be mixed with conventional switch boxes ASW-50C/SSW-50D
- Up to 5 additional units for T-ZACCS+ driver units or master units
Specifications
| Type | T-ZACCS UNIT Channel Unit AU-10/AU-10-05 |
|---|---|
| Number of measurement points | 10 points |
| Input terminal | Dual-use screw-mounted and soldered type |
| One-touch connector | NDIS One-touch connector (AU-10-05 only) |
| Power supply | Supplied by AU-50MA/AU-50M |
| Dimensions | AU-10：280（W）×45（H）×60（D）mm AU-10-05：280（W）×45（H）×80（D）mm *Excluding rubber protector and protruding parts |
| Weight | AU-10: approx. 900 g AU-10-05: approx. 1.2 kg |